SMD Tuning Tools

DD-1 / CC-1 / DD-1HV / DD-1+ NEW Test Tones CD

These are NEW test leads for the SMD Tools! Device Selection: DD-1 CC-1 DD-1+ AMM-1

A preloaded USB with ALL the SMD test tracks you need, including all manuals and software!   What does it come with? - DD-1 - DD-1+ - CC-1 - Manuals + Software!

Connect amplifiers to your factory radio The typical purpose of the HLC-2 is to bridge the gap between factory audio systems and aftermarket audio amplifiers.  With it's ability to accept up to a 40V...

THE CROSSOVER CALIBRATOR. USE TO ACCURATELY SET HIGH PASS, LOW PASS, BANDPASS, INFRASONIC (SUBSONIC) CROSSOVERS IN AMPLIFIERS AND PROCESSORS. CAN ALSO DO GAIN MATCHING OF AMPLIFIERS TO 0.01DB !! The...

OUR MOST POPULAR GAIN SETTING TOOL.  ALSO GOOD FOR SNIFFING OUT FAULTY EQUIPMENT.  FIND MAX CLEAN HEADUNIT VOLUME LEVEL, SET PROCESSOR / PREAMP GAINS, AND AMPLIFIER GAINS. The purpose of this tool is...

OUR TOP OF THE LINE GAIN SETTING TOOL.  DOES EVERYTHING A DD-1 DOES AND MORE, INCLUDING BEING ABLE TO RECHECK THE GAIN OVERLAP OF A SYSTEM AT ANY TIME. (LIKE WHEN CUSTOMER RETURNS) The purpose of...

The purpose and benefit of the D’Amore Engineering / SMD Distortion Detector. The purpose of this tool is to enable the installer to set the gain of an audio amplifier to match the source unit’s...

THE IMPEDANCE METER / SIGNAL GENERATOR  Some Uses: Obtain a driver's T/S Parameters* Determine speaker crossover set points Find tuning frequency of passive radiator Find tuning frequency of ported...

THE AUDIO MULTIMETER AND HANDHELD DYNO.  MEASURE TRUE AMPLIFIER POWER!  MEASURE IMPEDANCE OF SPEAKER BOXES.  MEASURE VOLTAGE DROPS, AND MUCH MORE! The purpose of this tool is to enable the user...

If you are familiar with our original DD-1 tool, the new / additional features of the DD-1+ are: Fully variable gain overlap setting from 0.0dB to 15.0dB Ability to check the gain overlap setting of...

The purpose and benefit of the D’Amore Engineering / SMD Distortion Detector. The purpose of this tool is to enable the installer to set the gain of an audio amplifier to match the source unit’s...